Project Description

Metal Core PCB (MCPCB)

Base Material: Copper substrate board
Outsourcing size: 41*25*23mm
Copper Thickness: 18/25/35/70um
Board Thickness: 0.0075″(0.2mm)-0.125″(3.2mm)

Metal Core PCB (MCPCB) is a type of printed circuit board that contains a base metal material. In contrast to FR4 and CEM3 printed circuit boards, a Metal Core Printed Circuit Board uses a base metal to increase the thermal conductivity of the PCB. The metal core is composed of a metal plate with an appropriate thickness to dissipate heat.

Inquiry
Item Capability
Layers 1-30
Thicker Copper 1-6OZ
Products Type HF(High-Frequency)&(Radio Frequency) board, Impedance controlled board , HDI board ,

BGA& Fine Pitch board

Solder Mask Nanya&Taiyo ;LPI & Matt Red, green, yellow,white, blue,black.
Base material FR4(Shengyi China、ITEQ, KB A+,HZ), HI-TG, FR06, Rogers,Taconic、Argon and so on
Finished Surface Conventional HASL,Lead-free HASL,Falsh Gold, ENIG (Immersion Gold)OSP(Entek), Immersion Tin,ImmersionSilver,Hard Gold
Selective Surface Treatment ENIG(immersion Gold)+OSP, ENIG(immersion Gold)+Gold Finger,Flash Gold +Gold Finger,

immersion Silver+ Gold Finger, Immersion Tin+Gold Finger

Technical Specification Minimum line width/gap:3.5/4mil(laser drill)
Minimum hole size:0.15mm(mechanical drill)/4mil(laser drill)
Minimum Annular Ring: 4mil
Max Copper thickness: 6OZ
Max Production size:900×1200mm
Board Thickness:D/S: 0.2-7.0mm, Multilayers:0.40-7.0mm,
Min Solder Mask Bridge:0.08mm
Aspect ratio: 15:1
Plugging Visa capability: 0.2-0.8mm
Tolerance Plated holes Tolerance:0.08mm(min±0.05)
Non-plated hole tolerance:0.05min(min+0/-0.05mm or +0.05/-0mm)
Outline Tolerance:0.15min(min±0.10mm)
Functional test :
Insulating resistance : 50 ohms (mormality)
Peel off strength: 1.4N/mm
Thermal Stress test :2650c,20 seconds
Solder mask hardness:6H
E-Test voltage :500V+15/-0V 30S
Warp and Twist: 0.7% (semiconductor test board≤0.3% )

Popular products